The following technical data sheets are available for members of Timber Queensland. These data sheets are revised, updated and current as of February 2015.

Click on the title to download the data sheet.

1. Timber Panelling
2. Finishes for Exterior Timber
3. Treated Pine Cladding
4. Residential Timber Decks
5. Cypress and Hardwood Cladding
6. Treated Pine Outdoors
7. Timber Decks Commercial, Industrial & Marine
8. Timber Garden Walls (Up to 1 metre high)
9. Timber Retaining Walls Residential
10. Seasoned Softwood Framing
11. Tongue and Groove Timber Flooring General Information
12. Protecting Buildings from Subterranean Termites
13. Residential Timber Decks Close to or on the Ground
14. Sub-Floor Ventilation
15. Specifying Timber
16. a) Species, Properties and Uses and
    b) Species Tables
17. Timber Floors Pre Installation Assessment
18. Timber Floors Recommended Installation Practices
19. Pergolas and Carports
20. Residential Timber Fences
21. Sanding and Finishing Timber Floors
22. Light Organic Solvent Preservative Treated Timber
23. Handrails and Balustrades
24. Recommendations for use of H3
25. Outdoor Timber Performance
26. Truss Installation
27. Measuring Moisture Content
28. Moisture in Timber
29. Moisture Effects on In-Service Performance
30. Fire Hazard Properties
31. Acceptable Appearance from Timber Floors
32. Wind Tie Down Connections - Getting it Right